Concrete is the quiet foundation of every fence that stays plumb through frost, wind, and wet seasons, and knowing how much concrete per fence post you actually need is the difference between a solid, straight fence and one that leans after the first hard winter. Most 4x4 wood or metal fence posts require 2 to 4 bags of 80-pound concrete each, depending on hole depth and diameter, while heavier 6x6 gate posts can need 6 to 8 bags. This guide walks through the exact math, a ready-to-use reference chart, and the practical details that keep posts standing for decades.
Why the Amount of Concrete per Fence Post Matters
Underestimating means a mid-pour trip back to the store with a half-cured hole. Overestimating wastes money and, worse, can create a concrete collar that traps water against the base of a wood post and speeds up rot.
The right amount does three jobs:
- Resists lateral load from wind, leaning dogs, and gate slamming
- Transfers load below the frost line so freeze-thaw cycles don't heave the post upward
- Creates a rigid anchor that keeps the post plumb while rails and pickets are attached
The Simple Rule: Hole Size First, Bags Second
Concrete quantity is driven entirely by hole geometry. Two rules of thumb cover almost every residential fence:
Depth: How Far Down to Dig
Dig to one-third of the total post length, with a practical minimum of 30 inches (2.5 feet). For a 9-foot post with 3 feet buried, that's exactly one-third.
states and Canada. When in doubt, call your local building department; frost-depth requirements are often codified and may exceed the rule of thumb.
Diameter: Match the Hole to the Post
A 4x4 post needs an 8- to 12-inch-diameter hole. An 8-inch hole is the minimum for a light fence in stable soil; 10 inches is the residential standard; 12 inches is wise for windy sites, sandy soil, or posts carrying gates. A 6x6 post should have a 12- to 14-inch hole. The extra diameter matters because lateral strength comes from the concrete mass around the post, not just the depth below it.
The Math in One Line
Concrete volume for a round hole is:
Volume (cubic feet) = π × radius² × depth
Use feet for every dimension, then divide by the yield of one bag. An 80-pound bag of concrete mix yields about 0.45 cubic feet; a 50-pound bag yields about 0.60 cubic feet; a 60-pound bag yields about 0.375 cubic feet.
Example: a 10-inch hole, 36 inches deep.
- Radius = 5 inches = 0.417 feet
- Volume = 3.14 × 0.417² × 3 = **1.64 cubic feet