5/8 inch equals 15.875 millimeters — a conversion that comes up constantly in woodworking, mechanics, plumbing, sewing, and DIY projects where imperial and metric tools have to work together. Understanding how to make this switch quickly, and why it works, saves you from stripping bolt heads, drilling the wrong hole, or ordering the wrong part. This guide walks through the math, the reasoning behind it, a handy reference table, and the practical situations where knowing that 5/8 inch is 15.875 mm actually matters.
The Short Answer
If you only need the number, here it is:
- 5/8 inch = 15.875 mm
- Rounded for everyday use: about 15.9 mm, or roughly 16 mm
- In centimeters: 1.5875 cm
The calculation behind it is simple: one inch is defined as exactly 25.4 millimeters, so you multiply the inch value by 25.4 Simple, but easy to overlook..
Why One Inch Equals Exactly 25.4 mm
The inch and the millimeter belong to two different measuring families. S. The inch is part of the imperial and U.customary systems, while the millimeter belongs to the metric system, which is built on powers of ten.
For a long time, the inch was defined differently in different countries, which caused real problems in trade and manufacturing. 4 millimeters** — not approximately, but exactly. 9144 meters. Since a yard contains 36 inches, one inch became exactly **25.In 1959, the International Yard and Pound Agreement fixed the yard at exactly 0.That definition is still used today in the United States, the United Kingdom, Canada, Australia, and everywhere else that uses inches.
The official docs gloss over this. That's a mistake.
Because the relationship is exact, conversions between inches and millimeters are precise, not estimates. When someone says 5/8 inch is 15.875 mm, that number is not rounded at all — it is the true value.
Step-by-Step: Converting 5/8 Inch to Millimeters
Here is the full process, written out so you can repeat it with any fraction.
Step 1 — Turn the fraction into a decimal. Divide the top number by the bottom number: 5 ÷ 8 = 0.625
Step 2 — Multiply by the conversion factor. 0.625 × 25.4 = 15.875
Step 3 — Attach the unit. 0.625 inch × 25.4 mm/inch = 15.875 mm
Step 4 — Round only if your task requires it. For machining or engineering drawings, keep 15.875 mm. For a quick hardware-store guess, 15.9 mm or 16 mm is fine.
You can also do it in one line:
(5 ÷ 8) × 25.4 = 15.875 mm
The Same Method Works for Any Fraction
Once you know the pattern, you can convert anything on an imperial ruler. Consider this: multiply the decimal form of the fraction by 25. 4.
| Fraction | Decimal (inches) | Millimeters |
|---|